SelectPak
Solutions Handbook
Sign up to Get Your FREE 128 Page Handbook Sent Today!
Get One!
Additional Literature
Signal
Conditioning Whitepaper
|
Choose from a full line of SelectPakTM modules with field selectable ranges.
|
Datasheet
Loop Powered Isolator
|
- Input Loop Powered
- Only 0.24" (6.2mm) Wide
- 0.1% accuracy
- Galvanic Isolation (4.0 KV)
- Screw or Cage Clamp Connections
- No Configuration Required
|
|
Signal Conditioners
|
- 0.1% accuracy
- Automatic calibration for all ranges
- Galvanic Isolation (4.0 KV)
- Signal Filtering (Noise Elimination)
- Up to 48 input / output combinations
- Field Selectable (Dip Switch)
- Universal Power (17 to 264 V AC/DC)
- Screw or Cage Clamp Connections
- Input short circuit protection
- Reverse polarity and over current protection
|
Detailed SelectPak Module Datasheets
|
Limit Alarms
|
- 0.2% accuracy
- Automatic calibration for all ranges
- Galvanic Isolation (4.0 KV)
- Two independently adjustable relay contacts
- Screw or Cage Clamp Connections
- Input short circuit protection
- Reverse polarity and over current protection
|
|
Detailed SelectPak Limit Alarm Data Sheets
Common Uses of our Signal Conditioners:
- Signal Type Conversion (ex. RTD Input to 4 to 20mA Output, 0 to 30 VAC to 0 to 10 VDC, etc.)
- Signal Level Conversion (ex. 0 to 5V Input to 4 to 20mA Output)
- Ground Loop Elimination
- Signal Filtering (ex. Variable Speed Drive Noise Elimination on a 4 to 20 mA loop)
- Increased Loop Current Drive (Higher Compliance)
|
|
