Industrial Wireless
ReFlexIO
ReFlexIO Family Overview
Additional Literature
Wireless Accessories
(Antennas, Cables, etc.)
ReFlexIO
Manual
ioPro
ioPro Family Overview
Additional Literature
Wireless Accessories
(Antennas, Cables, etc.)
ioPro Product Info
ioPro
WDL Setup Guide
ioPro Mirrored IO System Quick Start Guide
EtherWave
EtherWave Family Overview
Additional Literature
Wireless Accessories
(Antennas, Cables, etc.)
EtherWave-WEB User's
Manual (5MB)
EtherWave-WER
Quick Start Guide
EtherWave-WER User's
Manual (2MB)
EtherWave-WMR
Operating Manual (2MB)
Airio
Airio Family Overview
|
Wireless that Works!
ioSelect has the most extensive family of Wireless
communications (Ethernet and Serial) and Wireless IO products available. We have products that work in a wide variety of applications (even Class 1 Div 1 hazardous areas). All our products are license free, easy to apply, and are affordable.
Local Control and Display (Wireless IO)
The new ReFlexIO™ from ioSelect is a powerful wireless control system in a single box!
Available with Class 1 Div 2
Approval
Detailed ReFlexIO™ Datasheets
Modular and Expandable (Wireless IO)
The ioPro™ family has added a 900MHz FHSS wireless modem module that works with the other modules of the
ioPro™ series which add yet another option to our comprehensive set of Wireless I/O solutions.
|
ioPro™ WDL
High Power Industrial FHSS Transceiver
|
- Serial Radio Modem (RS-232 / RS-485)
- DC Powered
- 900MHz ISM License free band
- Frequency Hopping Spread Spectrum
- Up to 1 Watt Output Power
- Up to 115Kbps Transmission rate
- IO Expandable via ioPro™ Modules
- Modbus-RTU support (Modbus Slave)
- Mirrored IO (Wireless I/O cable concentrator)
- Antenna options available
- Solar options available
|
Detailed ioPro™ WDL Datasheets
EtherWave™ Wireless Ethernet
The EtherWave family is a complete solution for
accessing remote Ethernet (TCP/IP) devices. EtherWave is a 900MHz ISM
band license free solution that is designed to be easy to setup and
reliable to run.
|
EtherWave WEB
Wireless Ethernet Bridge Pair
|
- Obstacle Penetrating Wireless Ethernet
- Range of up to 20 Miles (Line of Site)
- Does Not Interfere with Wi-Fi Networks
- High Quality of Service (QoS) - Low Jitter / Latency
- 128 bit Encrypted Payload Protection
- Simple Plug and Play (Pre-Matched Pairs)
- VLAN Extensions Supported
- No FCC License to Operate or Install
|
|
EtherWave WER
Wireless Ethernet Multi-Point Radio
|
- Obstacle Penetrating Wireless Ethernet Bridging
- Range of up to 20 Miles (Line of Site)
- Does Not Interfere with Wi-Fi Networks
- Install up to 16 Clients Radios per Central Access Point
- Operate up to 12 Access Points in the Same Area
- 128 bit Encrypted Payload Protection
- Simple Plug and Play (Pre-Matched Pairs)
- No FCC License to Operate or Install
|
|
EtherWave WMR
Wireless Ethernet Multi-Point Radio
|
- Obstacle Penetrating Wireless Ethernet
- Class 1 Div 2 approved
- Range of up to 20 Miles (Line of Site)
- Does Not Interfere with Wi-Fi Networks
- Fully Managed via WebPages or SNMP
- 256 bit Encrypted Payload Protection
- No FCC License to Operate or Install
|
Detailed EtherWave™ Datasheets
Intrinsically Safe Battery Powered Wireless
The Airio™ family of products provide customers the easiest to deploy and
cost competitive solution for monitoring assets in hazardous areas or
without power available. Typical types of applications include:
- Tank Level Monitoring (Chemical, Petroleum, etc.)
- Electricity Sub-Metering
- Bio-Medical Freezer Monitoring
- Pollution Compliance Monitoring
Class 1 Div 1
Approved
|
AirIO™ LP Wireless Sensors
|
- Sensors with Low Powered radio technology Built-in
- Intrinsically safe level sensors, switch, and 4-20 ma monitors (Class 1 Div 1)
- Battery powered for up to 5 years
- Battery powered sensors as well
|
Detailed Airio™ Datasheets
|
|
